most of the time, the rattle sound is produce by below culprit .

1. dismantle both side rubber & cover.





2. push up top dashboard cover with both hands at cluster gauge area, gently. i never take this photo due to no hand.

3. once top dashboard are up, do not take out top dashboard. dismantle aircond sensor cable, as shown from below.



4. once dismantle, gently pull dash board toward ur side.

5. after top dashboard are out, the thing look like this.







6. top dash board cover.



7. this is the culprit, can u see. the guide pin already been rubbing with hole for guide pin to insert. that why u can hear annoying rattle sound from ur dashboard.





8. so i decided to wrap the 3 guide pin with span & tape it.





9. insert it back last out first in.

10. conclusion:

a: guide pin rubbing with hole pin.



b: one of the hole pin, middle hole is actually is a metal part. will cause guide pin rubbing again it & create rattle sound.




ok cheers go high tea first, will continue later.

:clap3: :clap3: :clap3: good job dancing

Terima kasih

basically any contact or anywhere with gap is possible to give out rattle sound, just a matter of time..... <_<
Just put some double sided tape in between the gaps to eliminate future sound even though there isn't any yet... you'll never know. :D

Yap agree. Tat y my topic is 1pt.
Coz halfway my friends ask me to go out .

top: top: top: top: top:

Cool..!!! thanks bro...but a bit scared to DIY.....dont know will spoil other parts bo...

my thinking exactly... since all mainly plastic parts :(

just now i was just trying to peal off the side rubber but my hand was shivering la...huh huh!!!

if not sure better be careful... plastic parts easily break if not careful... one good trick is to see/learn from the SC tech when they service ur ride... they will tell/show u how to do if they have the time... ;)

Hi All,

wau, this is good info top: top: so basically that is the culprit. But then again I don't dare to dismantle ler on my 5 months old car, scare that I will break any plastic pin.

Anyone here have tried to settle this in SC? I went there for my car service and already told them about this dashboard sound but still the same. :angry:

this always take time... i reco u go with the tech while he is trying to figure it out where the sound comes from... 2 eye/ear is better than 1... what to look for oredy listed in earlier thread... hope u nail urs soon... beer

yup i agree brother. i am going back also to see my tech later. he also ask me to join him together-gether listen and find the problem. thought of showing him the photo here. keke. scared will insult him, later he said i think look down on his skill and knowledge!

put ur hand pull pressured at the plastic cover, it will come out easily.

btw since the car still under warranty ask TC to do it. laugh

bro is knowledge sharing lar, not look down. i believe if u can share information with them, they are happy enough to listen.

bro ask TC to do it since is warranty & free, i believe soon they will find this problem.

Bro your tea time take so looooog lah, where the continue part?? boring
:D :D

alamak kena shoot liao, bro saya raya juga mah.

ok see this week ada time bo?

ok last week open dashboard again.

dismantle s type dashboard inner & outer as shown.



to stick aero sheet (heat insulator) in between.







fix s dashboar inner & outer.



in between below s dashboard, i put a little sponge to avoid rattle sound came out from there.(material expand due to hot may cause also).







in between dashboard & wind screen -> sponge.





driver side aircond & possible area.

ok

buddy really good lar.... thanks for your hardwork & effort spent in snapping the photo 1 by 1 to educate the members here, really appreciate ! party

adore adore adore

Sifu!

if can show live will be better haha adore top:

what can i say... u r the man... biggrin

Bro u want try on ur car ? Can be arrange.

Btw thank for comment.

do it... do it... do it... ok